OZ9800 – RFoF Subsystem
The OZ9800 series is populated using OZ600, OZ810, OZ816, OZ1603 or OZ1606 linear optical stand-alone modules in, a 1U 19” rack mount chassis. The modules can carry RS232 in addition to the broadband RF signal (on the same fiber). Each module has an individual DB-9 connector on the back panel that provide monitoring and alarms in addition to the RS232 signals. Links can be single fiber with built-in WDM. This custom-built product is capable of carrying up to 5 modules – each of which can be transceivers (TxRx) or only a Transmitter (Tx) or Receiver (Rx). Standard operational frequency ranges between 47 MHz and 3 GHz but it can be extended to range from 10 KHz to 6 GHz for both Cooled DFB or standard lasers.
OZ9800 can be powered using DC (+12 or -48 Volts) DC or 110-240 Volts AC. Dual redundant power supplies with automatic switching are standard for all chassis. Cooled DFB and/or builtin WDM are also available. Front panel LED indicators enable a visual check of power supplies and cumulative link status.. Standard optical connectors are SC/APC or FC/APC. RF connectors are 50 Ohm SMA or QMA – others e.g. 75ohm BNC are available for special orders.
- Houses up to 5 PCs of OZ600, OZ810, OZ816, OZ1603 or OZ1606 TRx modules
- Houses up to 5Tx or 5Rx of OZ600, OZ810, OZ816, OZ1603 or OZ1606 modules
- 1U, 19 x 15 in. chassis with optional 19 x12 in.
- Front Panel Alarm Indicator
- Dual Universal AC Power Supply
- Dry Contact Alarm outputs per each Tx and Rx.
- 0C to +60C Operating Temperature
- MTTF exceeds 10 years at +50C
- Internal WDM for single fiber functionality
- Multimode Fiber Compatibility
- CWDM wavelength lasers to allow transport of multiple RF channels over single fiber
- 1.25 Gbps Ethernet Data Link
- In‐Building DAS Solutions
- Satcom
- WiMax/4GLTE
- Cellular Backhaul
- MMDS
- Remote Antenna Location
- GPS Signal Distribution
- Timing & Frequency Signal Distribution